Qinhuangdao Fast Gate Radar Fast Gate Manufacturer
Many products in industry are made of steel machinery, so they have good stability. After long-term application, a large number of dirt will be produced. If not handled in time, the speed of the fast door will be reduced. Therefore, the manufacturer requires the applicant to accept specialist lubrication and apply it on the moving bearings to maintain its flexibility. In many cases, novices do not know how to distribute lubricants evenly every time they apply lubricants. Excessive amount of lubricant solidified on the blade will cause slippage. Cleaning methods should be adopted at this time. In addition, the failure of slippage may also be due to the fact that too much lubricant solidifies on the blade.
If the components in the fast door curtain are loosened, then it is necessary to adjust the spring and control the pressure index of the electromagnetic field, so as to avoid the instability found by the machine. In addition, a large number of oil stains are pasted in the grinding sheet of the cantilever crane, which will make it have an effect and reduce the speed of operation. At this time, it is necessary to adopt gasoline to clean these. Dirt, but also to maintain the neatness of the worktable.
The anti-prying device of the fast rolling shutter door includes a bottom groove embedded in the floor, a lifting panel, an automatic lifting function switch fixed between the bottom groove and the lifting panel at both ends, and an interlocking stacking door of Zhangjiakou Express Gate. The switch includes a hollow T-shaped switch seat with corresponding side positions. A through hole suitable for pin penetration is provided, and a cylindrical hollow sleeve with closed bottom is arranged in the switch seat. An inverted L-shaped through groove and a positioning pin are arranged at the side of the sleeve, and a lifting valve core is arranged in the sleeve.
The spool includes a spool body with one spring at each end. Why does the "Tangshan Express Gate" flutter sharply when it runs? A through hole suitable for pin penetration is arranged on the valve core body, and a closed valve core sleeve is arranged on the valve core body. An inclined groove and a positioning guide groove opposite to the inverted "L" groove position of the corresponding sleeve are arranged on the valve core sleeve. The pin passes through the through hole of the switch seat, the through groove on the sleeve, the inclined groove on the valve core sleeve and the valve core body in turn. The through hole positioning on the switch seat and the bottom groove are provided with a spring. When the switch seat is locked, the lower end will be inserted into the anti-prying device to achieve the anti-prying function.
Even after installing anti-prying technology on ordinary fast curtain doors, shopping malls or stores are 100 times burglar-proof, and your property is more secure!, what level of wind can the fast curtain doors of Beijing stack doors withstand?